Repair tips database, Service Manual free download,schematics,datasheets,eeprom bins,pcb,repair info for test equipment and electronics

Repair tips

Make	Model	Problem	Solution	Date

Found: 9
Sharp	CA10 66DS03H	BOTTOM HALF OF PICTURE OK TOP IS LINES WITH E/W DIST	REPLACE F601 NEAR LOPTX	14-09-04
Sharp	CA10 66DS03H	Dead	Dry joint & o/c C613 680n & res across it o/c- to rt of Loptx	14-09-04

Sharp	CA10 66DS03H	Dead - LOPTr Q602 BUH515 s/c	C604	14-09-04
Sharp	CA10 66DS03H	Dead with whine from psu	Dry joints C613 680n - replace cap & resistor across it	14-09-04
Sharp	CA10 66DS03H	Field - bottom ok top squashed with lines	F601 N27 2.5A fuse	14-09-04
Sharp	CA10 66DS03H	No control via front or remote	R705 68k st/by 5v feed	14-09-04
Sharp	CA10 66DS03H	NO REMOTE OR FRONT FUNCTIONS	CHECK R704/705 FOR O/C OR HIGH VALUE SHOULD BE 68K	14-09-04
Sharp	CA10 66DS03H	St/by only	LOPTr s/c due to almost invisible dry joints on scan coil conn	14-09-04
Sharp	CA10 66DS03H	STUCK ON 1 CHANNEL, NO REMOTE OR FRONT FUNCTIONS	REPLACE R705 68K	14-09-04

page: 1